Remote Transmitter Calibration

Model DXT-21

Use the following procedure to match the hand unit to the SCALE REMOTE:

1. Open the scale remote cabinet (mounted to the outside of the vehicle).
2. Use caution when handling the board to prevent damage to wires or board.
3. Turn the scale power ON.
4. Locate the remote receiver printed circuit board in the rear of the cabinet. Find the SMALL BLACK BUTTON on the remote board. Press and release this button.
5. The Small red light on the receiver board will turn on with a steady light.
6. Now press the green button on the hand unit.
7. The small red light will begin to flash. As soon as the red light on the receiver board goes off, the units are matched together.