SETTING TIME & DATE ON OMNI 510 / 512 SCALE

1. With the scale turned on press the [OMSI] key.
2. (SEC id) will be displayed.
3. Using the [NET/GROS] key and the [TARE] key enter in the number 1 digit six times. The [TARE] key is the incriment advance, and the [NET/GROSS] key is the position advance. So, with the display showing (SEC id) press the [TARE] key. Display now shows “0”, press the [TARE] key to change it to a “1”. Then press the [NET/GROSS] key, display now shows a “10”. Press the [TARE] key to change that zero to a “1”. Display now shows”11”. Keep repeating until all six number 1”s are displayed.
4. With all six number 1’s displayed press the [PRINT] key one time. The print key has now became the ENTER key.
5. (Uid) will be displayed, press the [OMSI] key.
6. (ti) will be diplayed, press the [PRINT] key, time will be displayed. Hr, min, sec. Using the [TARE] key and [NET/GROSS] key as in step # 3, enter in the current time in six digit format. (24 hour). Then press the [PRINT] key.
7. (dt) will be displayed, press the[PRINT] key, date will be displayed.mh,dy, yr. Using the same method as to change the time, enter in the correct date, then press the [PRINT] key.
8. (AL) will be displayed. Press the [NET/GROSS] key. This will exit the scale back to the gross weighing mode. Time and date have now been set.