QUICK EASY GUIDE FOR OPERATING OMS 510/512 SCALE

TURN SCALE ON BY PRESSING “ON” KEY. SCALE WILL COUNT FROM ALL

88888'S DOWN TO ALL 00000'S.

PLACE SCALE IN GROSS WEIGHING MODE IF IT IS NOT ALL READY THER BY

PRESSING THE “NET/GROSS” KEY UNTIL GROSS LED IS TURNED ON.

ZERO BALANCE SCALE BEFOR LOADING.

TO ZERO BALANCE SCALE, PRESS AND HOLD THE “ZERO” KEY THEN PRESS THE “TARE” KEY. LISTEN FOR BEEP THEN RELEASE BOTH KEYS. SCALE WILL DISPLAY

c 0 THE SCALE IS NOW ZEROED OUT AND READY TO BE LOADED.

(SCALE CAN NOT BE ZEROED IF MOTION LED IS ON OR SCALE IS NOT IN GROSS

WEIGHING MODE)

ON MODEL 510 SCALE, THE ID LED, PRESET LED, AND LOAD LED ARE NON

FUNCTIONAL.

PRESSING THE “NET/GROSS” KEY TOGGLES THE DISPLAY BETWEEN GROSS AND

NET WEIGHING MODES.

PRESSING THE “TARE” KEY PERFORMS A TARE FUNCTION, WITCH SWITCHES

TO THE NET MODE AUTOMATICALLY(IF NOT ALREADY THERE) AND ZEROS THE

NET WEIGHT. EXECUTING A TARE DOES NOT AFFECT THE GROSS WEIGHT.

ON MODEL 512 SCALE, I.D.#s AND PRESET WEIGHTS MAY BE SET INDEPENDENTLY BY PRESSING THE I.D# OR PRESET KEY RESPECTIVELY. THE

LAST USED VALUE IS DISPLAYED AND MAY BE MODIFIED BY ENTERING A NEW

VALUE BY USING THE “NET/GROSS- TARE” COMBINATION KEYS AND “ENTER”

KEY TO ACCEPT. USE THE “NET/GROSS” KEY TO EXIT WITHOUT STORING A NEW

VALUE AND THE “ZERO” KEY TO RE-DISPLAY THE LAST USED VALUE IF A

MISTAKE IS MADE IN ENTERING A NEW NUMBER.

ENHANCED MODE MODEL 512 SCALE ONLY, THE OPERATOR HAS THE ABILITY

TO STORE UP TO 64 I.D.#/PRESET PAIRS. SEE PAGE 25 OF MANUAL.