Home Up                                           

     
        

      GSE 465      

        

 

 

   
         
 

 
 






 
 
 
 
    Checkweighers  > Model 465 Check Weigher
 
  Approvals
  Literature
  User Guide
  Calibration
 
 
 
Communications  
  Comm 1 RS232 Full Duplex or RS485 multi-drop opt. or 20 mA opt.
  Comm 2 RS232 Full Duplex
  Data Output String Up to 4 custom formats
  Protocol Modbus RTU, ASCII. Opt.: DeviceNet, Profibus, Ethernet ((wired), HTTP, Telnet, FTP, Modbus TCP/IP), RF
  Baud Rate 150-58,300 bps
Construction  
  Indicator Enclosure Material Stainless Steel NEMA 4X (IP66)
  Column Material Gen. Ind.: Carbon Stl. or St. Stl. Washdown: St. Stl. NEMA 4X (IP66)
  Column Height Gen. Ind.: 21". Washdown: 8.5"
  Platform Material Gen. Ind.: Cast Alum., St. Stl. shroud. Washdown: St. Stl
Display  
  Display VFD: 6 Digit, 0.75" (19 mm) w/2x5 dot matrix
  Time/Date Clock Non-volatile, battery backed
Electrical  
  Power Requirement 90-250 VAC/ 10-32 VDC
  Excitation Voltage 10 VDC, short circuit protected; 340 mA
  F.S. Signal Input 0.1 - 20 mV/V
Operation  
  Remote Input 2 momentary contacts (100 ms min.), custom function
  Keypad 22 Key, Alpha Numeric, Chemical Resistant Elastomeric (Rubber)
Performance  
  Full Scale Factory preset based on capacity
  Resolution 5000d displayed (4000d for 20 lb, 200 lb)
  A/D Conversion 60 Hz
  Operating Temperature 14 F to 104 F (-10 C to 40 C)
  Warranty 2 Year Limited
  Units of Measure 4 user selectable per scale: kg, lb, g, oz; 2 custom
Physical  
  Platform Size (inches) Gen. Ind.: 12"x12", 12"x18", 18"x18". Washdown: 12"x12"
  Capacity 10, 20, 50, 100, 200 lb
  Maximum Overload (% F.S.) 200
 
Washdown Food & Pharma. Grade IP66, or Gen. Industrial Splashproof IP64
 
20 Alpha Numeric Product ID#s
 
Human-Readable Over/Good/Under Indication
 
GSE Distributor can customize language, addt'l fields, product info, description, lot #, job kitting
 
Rapid Display Update every 50 ms
 
 
 
  RS485 Module
 
  20 mA Current Loop
 
  Analog Output Module
 
  Output Relay Module
 
  Wedge Plus PC Software
 
  Stainless Steel Indicator Column
 
  Checkweigh Stacklight Kit, Gen. Ind. Use Only
 
 
 
  Wet Food Processing
 
  Pharmaceutical Processing
 
  General Weighing
 
  Industrial Processing
 
  General Filling
 
  Kit Assembly
 
  Parts Counting
 
  Percent Weighing
 
 
     


 

 

Home ] Up ]

Contact Information

Telephone
970-454-2291 Toll Free 800-227-1702
FAX
970-454-3491
Postal address
600 Oak Ave.Eaton Colorado 80615 USA
Electronic mail
General Information: sales@harshelectronics.com
Sales:sales@harshelectronics.com
Customer Support: techsupport@harshelectronics.com
Send mail to cburgess@harshelectronics.com with questions or comments about this web site.